Author: AQS Heating & Air Conditioning

The air conditioning unit is an important part of your HVAC system, particularly as the temperatures start to rise in the summer. It is critical to maintain air quality to preserve your comfort and your home’s energy efficiency.

Suppose you’re looking to replace or upgrade your HVAC system from our heating repair in Yucaipa. You can use this guide to choose the correct size unit, connect the air conditioner to your central heating system, estimate installation costs, and choose the optimum position for your AC unit.

Taking a Look at the Air Conditioner

The size of the unit has a considerable impact on air quality. If the team is too small, it will not be possible to treat the air in your home efficiently. An excessively big unit may lower energy efficiency and, in the worst-case scenario, shut down before the air has flowed through the system. When deciding how to install an air conditioning unit, consult with a professional on all aspects, including unit size.

The size of the unit is also determined by the amount of heat gain in your house. The specialist will evaluate how much heat is diffused into the living area while examining your property.

The heat gain estimate is affected by everything. For example, the location of doors and windows to the orientation of your property with respect to the sun. Knowing how much heat your house retains daily can assist the expert in choosing the most energy-efficient device for your area.

Maintaining an Energy-Efficient Home

Your professional will compute the SEER, or season energy-efficiency rate used to gauge energy efficiency during the examination. The quantity of energy used to run the air conditioner impacts the rating. Higher SEER ratings mean lower expenditures for you, and the expert will ensure that your HVAC system maintains your home’s energy efficiency.

The Air Conditioner and Thermostat’s Best Location

It would be best if you considered situating the new air conditioner away from you and your family since any air conditioner is likely to make some noise. Avoid placing the team’s external components near any bedrooms since this may cause future annoyance. The professional will choose the best position for the unit to be put in so that your house remains quiet and comfortable.

Suppose you considered where you would place the thermostat, which enables you to control the temperature in your house while also regulating the complete HVAC system. It’s preferable to keep the thermostat inside from any drafts that impact the total temperature readings.

You should also keep the thermostat away from ducts, which will force air into the device and potentially skew temperature readings. Install an intelligent thermostat to enhance energy savings by automatically adjusting the temperature reading to produce ideal living conditions.

Energy efficiency’s price

Any new installation comes with its own set of financial challenges. This kind of renovation has no set cost, and the cost of installing a new unit varies and is determined by various factors:

• Your house’s size
• Insulation and electrical system quality
• Number of windows and doors
• The state of the ducting

A specialist will assess your property and offer a cost estimate before finishing the air conditioning installation from our HVAC service in Hemet. The specialist will examine every component of your current heating and cooling system to decide which option is ideal for your house. Just call AQS Heating and Air Conditioning at (833) 789-1696

Other than stocking up on cozy winter clothes, preparing your furnace for the winter is an essential task. Our furnaces are kept dormant throughout the year until winter arrives. The inactiveness of our furnaces results in the accumulation of dust, rusting of furnace parts, extinguishing of the pilot light, etc. One must start preparing their furnace when the leaves change color and autumn arrives. Scheduling an HVAC service in Hemet can be extremely beneficial. Other than calling your technician, you can make a list as well. To ensure that your furnace is back to business with a bang, follow this list precisely:

1. Switch on the thermostat
The first step should be to check the thermostat. Turn the dial to heating from cooling and set the temperature you desire. Inspect the wires for secure connections if the furnace does not start generating heat instantly. Check whether the power source of the HVAC is switched on. If nothing works, check the furnace fan and blower or schedule a heating repair in Hemet, CA.

2. Check the safety devices
Ensure that all your HVAC switches are turned on. All the safety devices are in place, and the wire connections are error-free. Turn on the igniter as well. Moreover, all the covers should be in place to avoid electrical issues. Relight the pilot if the flame blows off. The flame should be blue and not yellow.

3. Change the air filters
One of the most important tasks is to change the filters. Over time, the filters might have clogged, restricting the airflow when you start your furnace. You can refer to the HVAC manual to change the filters or contact a professional. If you have a humidifier, ensure to change the humidifier filter as well.

4. Remove dirt from the heat exchanger
While the unit is disabled, ensure to clean the heat exchanger with a brush or a vacuum. Along with cleaning, look for any cracks that could leak carbon monoxide when the furnace starts operating. Clean all the parts of the furnace, such as the blower fans, burners, ignition,  heat exchanger, etc.

5. Check the chimney for any obstruction
Inspect the chimney of your furnace in case any obstructions like bird nests and debris are blocking the path, building up soot and dust. Soot buildup can result in a hazardous fire. An HVAC service in Hemet can help you with chimney inspection and fixing furnace problems, if any.

6. Lubricate your furnace
To initiate your furnace’s smooth functioning, every part has to be lubricated properly. The blowers of the furnace need to be oiled for them to throw hot air effectively. Once you complete every item on this list, your furnace will be ready to heat your room in the winter. Being in touch with a professional throughout the process can make furnace preparation easy, quick, and appropriate.

AQS Heating & Air Conditioning is an HVAC company offering HVAC services in California for 30+ years. To acquire a heating repair in Hemet, CA for your furnace before winter, contact us at (833) 789-1696 today!

HVAC refers to Heating, Ventilation, and Air Conditioning. HVAC systems are of two types, Commercial and Residential. Both systems may have a similar purpose of functioning, but one cannot say both systems are alike. The systems have many variations, and differences and the same major differences make each system unique in its own way.  The systems vary from each other in the following manner:

• Cost of maintenance and installation
  Both the systems being different and complex, have different costs of installation and maintenance. Since Commercial systems are huge and complex in nature, the costs are usually high compared to Residential HVAC systems. Commercial systems require more time and effort for installation and maintenance. Hence the costs associated with them are generally high.
• Requirement for skilled professionals
  Again, commercial HVAC systems require skilled and trained individuals for installation because the installation process is highly complex and not all that easy.  Maintenance and installation of Residential systems may not always require the help of highly qualified individuals; however, experienced professionals would be required to serve their purpose.
• Mechanism and complexity
  The way a commercial system works is complex because the system caters to the needs of larger localities and a larger number of people. The drainage system is a combination of many portions. A residential HVAC system is simple in terms of the mechanism because it caters to the needs of a lesser number of people, and its functioning is limited to a lesser amount of area. It could be restricted to a small building premise, whereas a commercial system would have been widespread in a whole commercial complex with lots of industries, firms, and offices.
• Portability, size, and arrangement
  Commercial systems are huge and bulky. However, they are composed of one whole package. In most cases, residential systems are in splits and not bulky. Commercial systems are placed on the roof of a building because they require a lot of space. Residential systems, on the other hand, residential systems do not require a lot of space. In most cases, a residential HVAC system could be placed outside the house, on the lawn, or back portion of the house garden. They are usually placed on the ground of the house.

AQS HVAC, A Specialist in HVAC Services

Known for Heating and Air Conditioning services, at AQS, you can avail services of both types of HVAC systems.  We even offer repair services to commercial HVACs in Yucaipa. We have been in the business for about 30 years and are known for our high-quality service. Our trained professional can cater to both your business as well as residential needs of HVAC systems such as HVAC repairs in Yucaipa.

The most reliable way to ensure that your furnace stays efficiently functional for a long time is to ask an HVAC professional to timely service the furnace. Implementing the same helps the HVAC service provider detect a problem in its early stage. There could still be an issue with the furnace, which might cause trouble. That is why you must be familiar with signs that might indicate a problem with your furnace.

Five Signs that your furnace needs attention

Look out for these signs that can help identify if there is an issue with your furnace and whether you need to have it repaired:

1. Deteriorated air quality
If impurities build up inside your furnace, such as dust, bacteria, etc., the same can circulate everywhere in your home. That can reduce the air quality, and if left unattended, might have adverse effects on the health of your loved ones.

2. Reduced heating capacity
The job of a furnace is to provide heat and comfort. If your furnace is not producing adequate heat, you need to call a trustworthy HVAC service provider without any delay. In most cases, the issue arises as a result of leakages in the ductwork of the furnace. Also, there could be a calibration issue with the thermostat that might be preventing the furnace from producing sufficient heat.

3. The color of the pilot light
The pilot light in your furnace should ideally appear blue. Yet, at times, you might see that its color changes to yellow or any other color. If that is the case with your furnace, your furnace is incapable of dissipating the carbon monoxide produced in it. Carbon monoxide is a poisonous and odorless gas that is hard to detect. It is a serious issue that one should try to address at the earliest. AQS Heating and Air Conditioning can assist you with heating repair, Hemet.

4. Unusual smell
When you turn on the furnace, there can be a slight smell of the fuel burning. But, at times, you might notice that the odor is not quite like what it usually is. For instance, it could smell weird if the air filter of the furnace is unclean. The smell due to a clogged air filter is still a minor issue. It could be a bigger problem if the furnace is letting out a strong burning smell. In such cases, contact an HVAC professional immediately.

5. Weird noise
It is okay if your furnace makes a slight noise, for almost all HVAC appliances emit some sound while operating. But, if your furnace makes screeching or squealing sounds, that indicates an issue with the internal components; it could mean that the furnace has some loose parts, or there could be a problem with the motor, belt, etc.

If you see any such signs, give us a call at (833) 789-1696 We will be delighted to help you with HVAC services, Hemet.

Are you one of those people who use things way past their due date? Most things don’t last a lifetime. Accepting this bitter fact will help you pay closer attention to the condition your products are in, and in turn, replace them before it’s too late. One such product you need to keep an eye on is your furnace. Certainly, all households in America have a furnace to protect themselves from the harsh winter. There is nothing worse than having to pull your blankets tight at night to protect yourself from the cool wind, only to end up catching a cold in the morning. Don’t want this happening to you? Then replace your furnace ASAP! But there are four things that you’ll need to keep in mind before you do so:

1. What fuel source works best for you?
There are many options when it comes to choosing the fuel for your furnace. The more choices there are, the more difficult and confusing it becomes to pick one. So, first, think about which fuel would work best for your home. Let’s assume you don’t have a gas line in your home. This eliminates the gas furnace as an option, leaving room for other kinds of fuel. Evaluate all your options carefully in a similar manner to make the right decision.  After making an informed decision, you can head on over to AQS Heating & Air Conditioning if you’re looking for all things heating service in Yucaipa.

2. Save energy, save money
Costs go up and down unpredictably. But if you calculate correctly, there is a pattern to it. The newer furnaces are not only more effective but also save more energy, which in turn saves money. Now it’s up to you to decide whether or not you want to replace your furnace way ahead of its expiration. Calculate how much money will go down the drain in paying bills for your current furnace. And now, compare that with the installation costs and future bills of your potential new furnace. Determine which one’s cheaper and make the right choice. AQS, a commercial HVAC repair in Yucaipa, provides furnaces at a price that doesn’t burden a commoner’s pocket.

3. Free estimates
Enquiring around for the right furnace shouldn’t cost you any money. This isn’t like going to the doctor, where having small talk with them costs you more than your rent. Don’t let anyone scam you into paying for this service. Approach trustworthy sources such as AQS instead. They provide commercial HVAC repair in Yucaipa, L.A.

4. Installing zoning systems
Have a long and proper look at all the rooms in your house before replacing your furnace. Have you observed uneven room temperatures in different rooms? If so, you might want to consider installing zoning systems. These zoning systems allow for a more controlled environment. With the heating and cooling systems in your home, you have the option to select a different temperature for each room. No more kids fighting with their parents over their preferred room temperature. To keep maintaining peace, check out AQS’s heating repair services in Yucaipa.

Now that you know what to do leading up to replacing a furnace when it comes to actually buying a furnace, feel free to trust AQS Heating & Air Conditioning for all your commercial HVAC repair in Yucaipa.

1. Size of the furnace
The size of the furnace is arguably one of the most important things to consider before buying a new furnace. You need to check if the furnace fits in its designated place or not. And this doesn’t mean just sliding into place. It also means whether it is too large or too small. An oversized furnace will quickly heat the room, leading to frequent heating cycles. In contrast, an undersized furnace won’t be able to heat the room at all, leading it to run constantly and consume more energy.

2. Efficiency
Efficiency matters more than the price, don’t let anyone tell you otherwise. As the years pass, the efficiency of newer furnaces keeps on increasing. An efficient furnace is an intelligent investment, as it will save you much more money than it costs. So, always go for the furnace that has the highest efficiency ratings.

3. Blower type
The type of blower in the furnace matters as well. Single-speed, multi-speed, and variable-speed furnaces have different efficiency ratings. Variable-speed furnaces are the most efficient and the best option out of the three.

4. Fuel-used
The amount of fuel used by the furnace also makes an impact on the customers’ choice. Whether the furnace is gas-based, oil-based, or electricity-based, it will always have pros and cons.

• A gas-based furnace is efficient and reduces costs but requires you to have a connection to the local gas lines.
• An oil-based furnace is costly and produces poor-quality air but doesn’t require any external connection.
•  An electricity-based furnace produces good quality air, but it can burn a hole in your pockets for sure.

5. Warranty period
The warranty period of different furnaces might differ according to their type. Highly efficient and expensive furnaces have a longer warranty period than their inexpensive counterparts. But you should always make sure that you’re comparing furnaces of the same price range with each other, otherwise, it can be misleading.

6. Zoning
Zoning can improve the efficiency of your furnace and lead to reduced energy costs. It involves heating only specific areas of your home, like the bedroom or an entire floor, and so on.

7. Pricing
Lastly, you should consider your budget. Buying a highly efficient furnace that cripples you financially is not an intelligent choice. You should always go for the most efficient model within your budget so that you can enjoy the warmth without over-the-top expenditure.

Apart from these, factors like rebates and incentives, maintenance expenditure, installation costs et cetera are crucial. You need to talk to an HVAC professional before choosing the furnace that suits your home the best. AQS Heating & Air Conditioning’s HVAC repair Yucaipa team is always present to help you with your furnace choices.

Give us a call at (833) 789-1696, and we’ll be there!

A furnace is one of the most important things for the winter. Having a properly working and efficient furnace makes the winter cozy for you and your family. However, after installation, the working efficiency of the furnace degrades with time. In such conditions, you need to get a  heating repair in Hemet, CA. Regular repair and maintenance increase the capacity of your furnace.
If regular maintenance of the furnace is lacking it can lead to some weird kind of noise production from your furnace. These abnormal sounds can be clicking, banging, screeching, booming, rattling, humming, popping, etc. This can be very dangerous for your home and could be due to various causes.

What Can Be the Causes of the Banging Noise From the Furnace?

There could be hundreds of reasons for the production of the banging noise from the furnace. Some of the most commonly seen causes are given below:

• If ignition of the gas is delayed
  If your furnace is not igniting the gases immediately it indicates that you should call your contractor for heating repair in Hemet, CA. There can be various reasons behind this delayed ignition, such as air mixed with gases, low pressure of gas supply, dirty or restricted pilot light, clogged burners, etc.
• Expansion or contraction in the air ducts
  If you can hear a banging noise from your furnace several feet away, you should immediately call your contractor for heating repair in Hemet, CA. Expansion or contraction can happen due to excessive positive pressure, undesired ductwork, closed air vents, dirty air filters, and dirty ductwork.
• Dirty furnace burners
  Over time as your furnace works it makes some dirt. This situation can be worse in case the filter is also dirty. Such kind of dirt will ultimately lead to delayed ignition of the gas and production of banging noise from the furnace.

What Should You Do if You Detect the Banging Noise From Your Furnace When It Is Starting?

You should never ignore the banging noises from your furnace when it is starting. You should immediately call a good HVAC for repair and maintenance service. You can contact AQS Heating and air conditioning for such a purpose. Here you will get the expert team who will approach you as soon as you call us. The experienced team will plan the solution to your issue according to your budget and give the best output of it.

Follow the below-given points to do when you find a banging noise from the furnace –

• Plan annual heating repair in Hemet, CA so that the team of technicians can clean the ducts and burners.
• Change the air filter every month to evade pressure problems in the return duct of your furnace.
• Keep opening and cleaning all your vents to avoid pressure problems in the ducts.
• If you are using a furnace commercially, then schedule periodic commercial HVAC repair in Yucaipa for your furnace.

You can call AQS Heating and Air Conditioning at any time. Our team will immediately approach you as soon as you will contact us. You can either call us or drop a text at (833) 789-1696.